$ loading_
Turn MikroTik routers into AI-driven tools for automated network configuration.
Copy the install command and let the AI configure it · recommended for beginners
No copy-paste install info for "mikrotik-mcp" yet — see the docs or source repo.
Connect to my MikroTik router over SSH and create firewall rules for the guest network: block access to the internal 192.168.0.0/16 range, allow internet access, and list the configuration actions in execution order.
Produces and applies the firewall configuration steps, explaining rule order and expected behavior.
Use the MikroTik tools to build a site-to-site VPN between headquarters and a branch. The HQ public IP is 1.2.3.4, the branch public IP is 5.6.7.8, and the branch LAN is 10.20.0.0/24. Provide the full configuration and check common conflict points.
Outputs and applies VPN, routing, and policy settings while flagging possible address or rule conflicts.
Inspect the static routes, default route, and NAT settings on this MikroTik router. Find why internal hosts can ping the gateway but cannot access the internet, and provide remediation steps.
Returns a diagnosis, likely causes, recommended changes, and optionally applies the fix.
Manage MikroTik router configuration and network operations over SSH.
Manage MikroTik RouterOS safely with typed, auditable, rollback-ready MCP tools.
Monitor MikroTik routers and query RouterOS status with limited address-list management.
Manage multi-vendor network devices and run operations commands via SSH or Telnet.
Connect AI to remote servers via SSH for commands and secure file transfer.
Securely diagnose remote servers over SSH with guarded read and write access.