$ loading_
Let AI read, control, and debug microcontrollers over serial connections.
Copy the install command and let the AI configure it · recommended for beginners
No copy-paste install info for "embedded-mcp" yet — see the docs or source repo.
Connect to the available serial device, list serial ports, read the first 200 lines of boot output from the microcontroller, and summarize errors, warnings, and initialization status.
Provides available serial ports, boot log contents, and a brief diagnosis of anomalies and startup status.
Find the serial port for the target development board, send the commands "status" and "version", read the responses, and explain the current device state and firmware version.
Returns command results and summarizes the device state, firmware version, and any potential warnings.
I have a register value 0x0000A431. Decode each field according to the chip's register bit definitions, identify which flags are set, and infer the likely hardware state.
Explains each register field, lists the set flags, and analyzes the corresponding hardware state.
Communicate with embedded and IoT devices over serial for debugging and control.
Let AI connect to and control serial devices through MCP tools.
Let AI poll device serial output without blocking long-running monitoring tasks.
Use MCP to communicate with serial devices for debugging and control.
Access RS232 serial ports via MCP for listing, opening, reading, and writing.
Read, edit, and optionally compile Arduino sketches through an MCP bridge.