$ loading_
Control Digilent WaveForms instruments over USB for capture, generation, and testing.
Copy the install command and let the AI configure it · recommended for beginners
No copy-paste install info for "dwf-mcp-server" yet — see the docs or source repo.
After connecting an Analog Discovery 3, use dwf-mcp-server to configure oscilloscope channel 1 at 1 MHz for 10 ms, read the waveform data, and return key statistics.
Returns oscilloscope capture results, including waveform data or a summary with statistics such as mean, peak, and frequency.
Use dwf-mcp-server to control the AWG to output a 1 kHz, 2 Vpp sine wave on channel 1 for 30 seconds, and confirm the device settings were applied successfully.
Returns the signal generator configuration result, confirming frequency, amplitude, channel, and duration were set correctly.
Using dwf-mcp-server, start the logic analyzer on 8 digital channels at 10 MHz for 5 ms and summarize the number of detected digital state transitions.
Returns logic analyzer sampling results with a summary of state transitions or detected events for each channel.
Control oscilloscopes and signal generators via SCPI for automated test workflows.
Let AI control oscilloscopes for waveform capture and measurement analysis.
Control a bench oscilloscope over LAN for hardware debugging and validation.
Connect AI to an Owon oscilloscope for capture, measurements, and remote control.
Control logic analyzers with AI to capture, decode, and export digital traces.
Analyze hardware simulation VCD and GTKWave files for signals, buses, and groups.