$ loading_
Control Rigol oscilloscopes with AI through automated SCPI command execution.
Copy the install command and let the AI configure it · recommended for beginners
No copy-paste install info for "SkippyMCP" yet — see the docs or source repo.
After connecting the Rigol oscilloscope, read the current waveform data from CH1, save it as structured data for analysis, and return a summary of the time axis and voltage range.
Returns the CH1 waveform capture with structured data, time range, voltage range, and basic status details.
Run automatic measurements on the current oscilloscope input signal and report frequency, peak-to-peak voltage, period, and duty cycle in a readable summary.
Outputs the key measurement metrics of the current signal in a clear, readable summary.
Configure the oscilloscope with a suitable time base and trigger mode to observe a roughly 1 kHz square wave, then confirm whether the settings were applied.
Returns the applied oscilloscope configuration, including time base, trigger settings, and status confirmation.
Control a bench oscilloscope over LAN for hardware debugging and validation.
Control NI oscilloscopes with AI for acquisition, measurement, and configuration.
Control USB oscilloscopes with AI for waveform capture and measurements.
Use sigrok-cli via MCP to initialize logic analyzers, capture signals, and decode protocols.
Control lab test instruments with natural language and manage multi-device sessions.
Safely remote-control a SIGLENT oscilloscope to capture and analyze waveforms.