$ loading_
Remotely control Siglent multimeters and capture measurement data over TCP/IP.
Copy the install command and let the AI configure it · recommended for beginners
No copy-paste install info for "sdm-mcp" yet — see the docs or source repo.
Connect to a Siglent SDM3000 series digital multimeter and read the current DC voltage measurement over TCP/IP SCPI, returning a structured result.
Returns the current reading, measurement type, and related measurement output.
Switch the instrument to resistance measurement mode, apply the remote configuration, then collect multiple readings and return them as a list.
Outputs the configured measurement mode and a series of collected readings.
Use the MCP tool to remotely control the multimeter and poll measurements on a schedule for automated experiment logging.
Produces time-ordered logged measurement results.
Researchers can remotely connect to a Siglent SDM3000 series multimeter during experiments or validation work to read measurements and acquire data. This reduces manual recording and improves collection efficiency.
Developers can integrate this MCP tool into automated test workflows to configure the instrument and read results over SCPI. It fits scenarios that need programmable measurements and result capture.
Data analysts or validation teams can retrieve measurement data from the multimeter over the network for later organization and analysis. It is especially useful for data acquisition tasks that require repeated sampling.
It is an MCP server for remotely controlling Siglent SDM3000 series digital multimeters via the SCPI protocol over TCP/IP. It supports measurement, configuration, and data acquisition.
The provided information indicates that it targets Siglent SDM3000 series digital multimeters. For support of other models, see the source repository.
Based on the description, it communicates with the instrument over TCP/IP and uses SCPI for remote control. For exact setup steps, network configuration, or dependencies, see the source repository.
Safely remote-control a SIGLENT oscilloscope to capture and analyze waveforms.
Control Siglent oscilloscopes remotely and retrieve measurements and waveform data.
Control NI DAQ hardware for analog/digital I/O and waveform acquisition.
Control Rigol oscilloscopes with AI through automated SCPI command execution.
Use sigrok-cli via MCP to initialize logic analyzers, capture signals, and decode protocols.
Control a bench oscilloscope over LAN for hardware debugging and validation.