$ loading_
Connect AI to an Owon oscilloscope for capture, measurements, and remote control.
Copy the install command and let the AI configure it · recommended for beginners
No copy-paste install info for "ScopeMCP" yet — see the docs or source repo.
Connect to the Owon DS1102, capture the current CH1 waveform, and summarize peak-to-peak voltage, frequency, duty cycle, and any obvious noise.
Returns the captured waveform results, key measurements, and a brief signal quality analysis.
Set the time base to 1 ms/div, set CH1 vertical scale to 500 mV/div, enable automatic measurements, and capture the waveform again.
Applies the new settings and returns updated measurements or confirmation that the changes took effect.
Capture the CH1 waveform 10 times in a row, record frequency and peak-to-peak voltage for each run, then summarize the minimum, maximum, and average values.
Outputs repeated measurement records and summary statistics for stability or regression testing.
Let AI control oscilloscopes for waveform capture and measurement analysis.
Control a bench oscilloscope over LAN for hardware debugging and validation.
Control Rigol oscilloscopes with AI through automated SCPI command execution.
Control USB oscilloscopes with AI for waveform capture and measurements.
Control a PicoScope 5000A for capture, measurement, sweeps, and signal generation.
Control Siglent oscilloscopes remotely and retrieve measurements and waveform data.