$ loading_
Control a PicoScope 5000A for capture, measurement, sweeps, and signal generation.
Copy the install command and let the AI configure it · recommended for beginners
No copy-paste install info for "pico-mcp" yet — see the docs or source repo.
After connecting the PicoScope 5000A, capture 1 ms of Channel A data and report peak-to-peak voltage, frequency, and RMS voltage.
A waveform capture result with key electrical measurements included.
Use the built-in signal generator to sweep from 100 Hz to 1 MHz, test the circuit's frequency response, and output a summary of gain versus frequency.
A sweep test result summarizing gain changes across the frequency range.
Orchestrate an automated test sequence: output three excitation signals in order, capture each response, and compile the measurement results for every run.
A structured test log containing excitation settings and response measurements for each run.
Let AI control oscilloscopes for waveform capture and measurement analysis.
Control a bench oscilloscope over LAN for hardware debugging and validation.
Connect AI to an Owon oscilloscope for capture, measurements, and remote control.
Control oscilloscopes and signal generators via SCPI for automated test workflows.
Safely remote-control a SIGLENT oscilloscope to capture and analyze waveforms.
Control logic analyzers with AI to capture, decode, and export digital traces.